TS110
- Self-Powered Governor
The TS110 is a self-powered
electronic governor. A 9V battery provides enough power to the
integral I/P converter to initially open the steam control
valve. Once the turbine is running, the speed probes provide
speed measurement and enough voltage to continue powering the
TS110. The TS110 allows for replacement of hydro-mechanical
governors on remote location steam turbines where external power
may not be readily available.
310SV
- One-Valve Steam Turbine Control
The 310SV is a configurable
controller that provides automatic startup sequencing, speed
control, and process control for a one-valve steam turbine
driving a mechanical load (e.g. pump, fan, compressor). A
powerful PC configurator application allows the user to choose
from a wide selection of control options to match the turbine
operational requirements.
320
- Two-Valve Steam Turbine Control
The 320 is a configurable
controller that provides automatic startup sequencing, speed
control, and process control for a one-valve or two-valve steam
turbine driving a generator or mechanical load. A powerful PC
configurator application allows the user to choose from a wide
selection of control options to match the turbine operational
requirements.
TS3000
- Critical Turbomachinery Control for the 21st Century - All of
It
The TS3000 is based on Triconex
TMR hardware and provides unmatched reliability and availability
in controlling complex, critical turbomachinery applications.
The TS3000 is programmed to meet the specific requirements of
your steam turbine, gas turbine, generator or compressor. No
other turbomachinery control solution combines the technology
and features required to reduce nuisance trip rates to less than
one per hundred years. If your control requirements demand
flawless, enduring performance for even the most complex
turbomachinery applications, the TS3000 is the answer.
TS3410 - Upgrade for TS410 Steam
Turbine Control
The TS3410 is a specially
packaged Tricon triple modular redundant (TMR) controller
designed to replace your TS-410 with minimal expense and down
time. No other system available in the turbomachinery control
market can match Triconex's features for providing a
cost-effective, reliable, and available control system upgrade.
Most conversions can be accomplished in a minimum of turbine
down time.
TS3420 - Configurable TMR Steam
Turbine Control System
The TS3420 is a configurable
steam turbine controller that utilizes proven Tricon V9 TMR
fault tolerant hardware for the control system platform. The
system uses two-out-of-three voting to provide high-integrity,
error-free, uninterrupted process operation with no single point
of failure within the controller chassis.
The TS3420 provides automatic
startup sequencing, speed control, and process control for
one-valve and two-valve steam turbines. Two-valve configuration
allows control of extraction and/or induction applications. The
TS3420 has a number of control features that allow it to protect
and control both the turbine and the driven equipment.
PDF Info for Products & Auxiliaries
