Triconex TS-3410
|
 |
Steam Turbine Control
The TS 3410 is a specially packaged Tricon TMR
controller designed to replace your TS-410 with minimal expense and down
time. No other system available in the turbomachinery control market can
match Triconex’s features for providing a cost effective, reliable,
and available control system. Most conversions can be accomplished in a
minimum of turbine down time.
Applications
The TS 3410 is designed specifically to meet the
control requirements of a variety of steam turbine and driven equipment
types including:
|
Steam Turbine
- Condensing
- Extraction/Induction
- Inlet pressure
- Back pressure
|
Driven Equipment
- Compressors
- Synchronous and induction generators
- Paperline drives
- Critical pumps and fans
|
Upgrade to the Best
We use the world’s best turbomachinery
controller, the TS 3000, to give existing TS-410 users an affordable
upgrade path. The TS 3410 is a TS 3000 with a specially engineered
application program, interface panel, and conversion toolkit that allows
a quick and easy upgrade.
Extensive Diagnostics
By using the Tricon TMR controller as the basis of
the TS 3000 turbine controller, Triconex is able to offer the most
advanced features and diagnostics available for turbomachinery control
applications. Extensive diagnostics on each independent leg, modular
component, and functional circuit detect and report operational faults.
All diagnostic information is stored in system variables and/or
annunciated with TRICON module LED indicators and alarm contacts. This
information can be used within the application program to modify control
actions or direct maintenance procedures.
Easy Installation
Conversion from the TS-410 to the TS 3410 is a
simple process. Triconex has pre-engineered a special package intended
to minimize the down time. The package consists of these main
components:
- TS 3410 chassis
- Interface panel containing the operator panel and interconnect kit
- Conversion software toolkit
The existing TS-410 is removed and the interface
panel is installed in the exact same space. The mounting is identical to
the TS-410. The interface panel contains a new display panel with keypad
to emulate the TS-410 unit. This panel also includes a special
interconnect panel to connect the ribbon cables from the existing TS-410
termination panels (which remain in place) to the new TS 3410 chassis.
There are no field wires to disconnect or reconnect.
The new TS 3410 chassis can be installed in any
convenient location within 100 feet of the interface panel. Tricon I/O
connector cables can be ordered in increments of 10 feet. The I/O cables
from the TS 3410 chassis are connected directly to the special
interconnect panel on the replacement panel.
The configuration and tuning parameters are entered
using a Windows®-based conversion toolkit. This can be accomplished
during an optional FAT at the Triconex facilities, further simplifying
the conversion process. That’s all there is to it: the on-site
conversion can be accomplished in a minimum amount of turbine down time.
Package description
The TS 3410 package is pre-engineered and includes the following
scope of supplies:
|
Replacement Panel
- Operator interface LCD panel with redundant power supplies
- Emergency stop push-button
- Horn
- Termination kit
|
Software
- TriStation 1131
- TS 3410 application program
- TS 3410 conversion toolkit
|
|
|
|
TS 3410 Chassis
- Tricon single version 9 chassis
- 1 x Pulse input module
- Interconnect cables
- TS 3410 conversion toolkit
- 1 x EICM communication module
- 1 x Discrete output module
|
- Redundant chassis power supplies
- 1 x Analog output module
- TriStation 1131
- 3 x Main processors
- 1 x Analog/Discrete input module
|
I/O Type and Capacity
The I/O type and capacity for the new replacement TS 3410 meets or
exceeds the existing TS410 as shown by the following table:
| I/O Type |
TS410
|
TS3410
|
| DI |
16
|
16
|
| DO |
8
|
8
|
| Pulse |
4
|
4
|
| AI |
16
|
16
|
| AO |
8
|
8
|
| Total |
52
|
52
|
PDF Info>
